32 glenair, inc. 1211 air way glendale, ca 91201-2497 818-247-6000 fax 818-500-9912 ? 2003 glenair, inc. printed in u.s.a. cage code 06324 www.glenair.com e-mail: sales@glenair.com 5015 type connectors 257-005 connector receptacle assembly stainless steel harsh environment with printed circuit contacts product series basic number h = hermetic (omit for standard, substitute dash) 2 = receptacle assembly shell size (table i) 257 - 005 h 2 - 14s - 5 p w m m = molding adapter (omit for none) alternate insert position, see page 28 (omit for normal) contact style; p = pin s = socket (non-hermetic only) insert arrangement dash no., see page 28 recommended panel cut-out d c .500 (12.7) max panel f 1.820 (46.2) max a thread .450 (11.4) .065/.060 (1.7/1.5) dia (see note 3) .170 (4.3) (see note 3) polarizing key insert arrangement with solder pot contacts (page 28) b dia e 1. metric dimensions (mm) are indicated in parentheses. 2. electrical safety limits must be established by the user. peak voltages, switching surges, etc., should be used to determine the safety of the application. 3. applies to size 16 contacts only. consult factory for other sizes. e flats .870 (22.1) .995 (25.3) 1.120 (28.4) 1.495 (38.0) 1.620 (41.1) 1.870 (47.5) 2.120 (53.8) shell size 10sl 12 14s 18 20 24 28 a thread class 2a 5/8 - 24 unef 3/4 - 20 unef 7/8 - 20 unef 1 1/8 - 18 unef 1 1/4 - 18 unef 1 1/2 - 18 unef 1 3/4 - 18 unef b dia max 1.030 (26.2) 1.160 (29.5) 1.280 (32.5) 1.660 (42.2) 1.780 (45.2) 2.030 (51.6) 2.280 (57.9) table i f ref 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.730 (43.9) 1.870 (47.5) 2.165 (55.0) 2.448 (62.2) c dia + .010 (0.3) -.000 (0) .653 (16.6) .760 (19.3) .885 (22.5) 1.135 (28.8) 1.260 (32.0) 1.510 (38.4) 1.760 (44.7) d + .010 (0.3) -.000 (0) .585 (14.9) .710 (18.0) .835 (21.2) 1.085 (27.6) 1.210 (30.7) 1.460 (37.1) 1.710 (43.4)
|